Galvanized products

Galvanized Steel Sheet

Galvanized sheet is a type of steel that is coated with zinc for protection by an electroplating process. The galvanized layer is applied to cold rolled steel at low temperatures. So it is also known as cold galvanized steel.
Thickness:0.12mm-6.00mm
Width:600mm-1500mm
Length:1m-12m, Support Customization
Standard:AISI,ASTM,DIN,JIS,GB,
JIS,SUS,EN,etc.
Zinc Layer:Hot Galvanizing: 60-275g/m². Pre-galvanized: 80-275g/m²
Payment Method:FOB,CRF,CIF,EXW Acceptable

Galvanized Steel Coil

Through electrolytic galvanizing, a uniform and dense zinc layer is finally formed on the surface of the steel, but the mechanical properties of the material are still maintained. Electrogalvanized steel is usually sold in coil or sheet form The electro-galvanized products based on SPCC, SPCD, SPCE, SPCF and SPCG are named SECC, SECD, SECE, SECF and SECG respectively.

Thickness:0.12mm-6.00mm
Width:600mm-1500mm
Length:508mm/610mm, Support Customization
Standard:AISI,ASTM,DIN,JIS,GB,JIS,SUS,
EN,etc.
Zinc Layer:Hot Galvanizing: 60-275g/m². Pre-galvanized: 80-275g/m²
Payment Method:FOB,CRF,CIF,EXW Acceptable

Galvalume Steel Sheet

Galvalume steel sheet is a type of steel that is coated with zinc for protection by an electroplating process. The galvanized layer is applied to cold rolled steel at low temperatures. So it is also known as cold galvanized steel.

Thickness:0.12mm-6.00mm
Width:600mm-1500mm
Length:1m-12m, Support Customization
Standard:AISI,ASTM,DIN,JIS,GB,JIS,SUS,
EN,etc.
Thickness of Aluminum Zinc Coating:30-185g/m²
Content of Al-Zn Coating:Al: 55%,
Zn: 43.5%, Si: 1.5%
Payment Method:FOB,CRF,CIF,EXW Acceptable

Galvalume Steel Coil

Through electrolytic galvanizing, a uniform and dense zinc layer is finally formed on the surface of the steel, but the mechanical properties of the material are still maintained. Electrogalvanized steel is usually sold in coil or sheet form

Thickness:0.12mm-6.00mm
Width:600mm-1500mm
Length:1m-12m, Support Customization
Standard:AISI,ASTM,DIN,JIS,GB,JIS,SUS,
EN,etc.
Thickness of Aluminum Zinc Coating:30-185g/m²
Content of Al-Zn Coating:Al: 55%,
Zn: 43.5%, Si: 1.5%
Payment Method:FOB,CRF,CIF,EXW Acceptable